MX-5 OC Forum

The UK MX-5 Owners Club Online Community
MX-5 Parts
MX5OC Home |  Club |  Areas |  Motorsport |  Store |  Links |  My Account   | Inbox  | Profile
Welcome to MX-5 OC Forum Sign in   Search
Home Forums Downloads Technical FAQs

Search

Page 1 of 10 (95 items) 1 2 3 4 5 Next > ... Last »
  • Re: 4 wheel alignment.

    Had to cancel mine as car on axle stands awaiting bits for brakes :-(. Hoping to re book for next week somtime so will report back when done.
    Posted to North West Midlands Area (The MXicanS) (Forum) by chris h1 on Wed, May 15 2013
  • Re: 4 wheel alignment.

    Just booked mine in too for Monday afternoon 
    Posted to North West Midlands Area (The MXicanS) (Forum) by chris h1 on Thu, May 9 2013
  • Re: Garmin sat-nav power lead ~

    Not sure I would want to advertise there could be a sat nav in car by leaving cable's & mounts on show? You can get a twin 12 volt socket adapter if that helps. I run my Garmin through one of these as the 12 volt plug sticks out too far & I hit my hand on it when changing into fifth gear HTH
    Posted to Electrics (Forum) by chris h1 on Thu, May 9 2013
  • Re: NB disc/pad combo...

    Plenty of stopping power from EBC greenstuff pads :-) you do get a lot of brake dust from them though (you can't have your cake & eat it!!). Running them front & rear on my 2002 MX5 with drilled & slotted MTEC discs. I managed to get my pads off Ebay for £45 for a full set from someone who had sold there MX5 & had the new ...
    Posted to Wheels, Tyres & Brakes (Forum) by chris h1 on Wed, May 8 2013
  • Re: Need some stereo advice

    Not sure what the plugs are or where they go to with out physically inspecting them myself but in my opinion you have two options which are :- 1: Use a multi meter & trace all the wiring looms & repair/reconnect everything. 2: Sounds like you have power etc in all the right places so I would be tempted to run new speaker cables direct to ...
    Posted to ICE (Forum) by chris h1 on Tue, May 7 2013
  • Re: 3.5mm input into Mk2.5 stock head unit ~

    Your plug will be the same as the lower one in picture below (head unit came out of my 2002 MX5) 
    Posted to ICE (Forum) by chris h1 on Tue, Apr 23 2013
  • Re: Problems after disconnecting my battery

    With regard's to your head unit instead of the removal tool you are using (its very easy for these to be slotted inside the spring clips pushing them outwards preventing removal rather than slotting in correctly to the outside pressing plates in thus allowing unit to slide out) try 2 small screwdrivers in the bottom hole & 4th hole up. If ...
    Posted to Electrics (Forum) by chris h1 on Fri, Apr 5 2013
  • Spotted On A515 hill coming out of Ashbourne

    Saw a siver Mk1 with roof down coming up the A515 hill from Ashbourne past Fairways Garden Center this morning & not far behind a silver Mk2? with a hard top. Around 11 am & I was in a black mk2.5 waving like mad coming in the opposite direction (towards Ashbourne) 
    Posted to Spotted (Forum) by chris h1 on Sat, Mar 30 2013
  • Re: 3.5mm input into Mk2.5 stock head unit ~

    There is an input for the CD changer so logically thinking/pie in the sky stuff if you could solder a 3.5 mm socket onto the line in wires on cable that goes to said plug, that's if you can get hold of a cable (if not you would have to dismantel the head unit). Not sure if unit would recognise there's anything there though (all the ...
    Posted to ICE (Forum) by chris h1 on Sat, Mar 30 2013
  • Re: OE Head unit removal problem 2002 mk2.5

    Pic of spring lug's on side of head unit below should help you see what you are trying to acheive
    Posted to ICE (Forum) by chris h1 on Sat, Mar 30 2013
Page 1 of 10 (95 items) 1 2 3 4 5 Next > ... Last »