|
Search
-
Sounds the same as mine, brake light in boot changed to fog light. Much better than hacking a lump out of the bumper and legal. As far as I know there is no requirement to have a high level third brake light.
-
Jack Smith always seems to get good reviews on here.
Jack Smith Trimmers of Swansea Rear of 158 St. Helens Avenue Swansea SA1 4NQ 01792 461 022
-
Cleaned up a spare cam cover I have. Need to replace the gasket on mine so thought I would put a nice clean cover on at same time.
-
Bet you wish you had the Lotus Cortina now looking at the prices.
-
CAS "O" ring leak will contaminate bell housing area of gearbox, but the leak at the rear is probably the rear seal where the propshaft exits the gearbox. Simple to change, especially if you are having the box out. If not it is a case of removing the prop shaft, lever the pld seal out and tap a new one in. A suitable sized socket ...
-
Definately used to have an early red Mk 1 there.
-
There is three in our area club, but only one came with full graphics which have since been removed.
-
Removed old roof assembly and refitted replacement.
-
Not sure on the track rod end size but I have some Genuine Mazda top swivel boots here waiting to fit and they measure about 28 to 30mm for the large hole and 13mm for the small hole and 25mm high, so looks like these you have found may do.
Just for info the lower swivel boots measure large hole 38mm, small hole 17mm and height ...
-
Made up a couple of push adaptors to assist the fitting of top and bottom swivel boots for as and when I need to.
|
|
|